Jumper T16 pro v2 Hall + 433mhz shield
Description
Jumper T16 Pro V2 Hall sensor shield for 433mhz radios. Tested with 433T30D 433mhz 1W modules with QLRS. Stock radio has issues with these modules, catching a lot of noise on gimbal lines. Lowest power has a lot noise, and full power gets it to 'emergency mode' within 3 - 5 seconds. Shielding only the back cover of the radio did help, but still had a lot of noise. This mod basically lowers 99% of the noise, check my results here: https://www.youtube.com/watch?v=gBWRGof567Y Shield needs to be soldered to the ground, you can see how it's done here (or do it your own way). If you decide to play with this, you're doing it on your own risk!
Statistics
Likes
2
Downloads
0