Screw/Bolt extractor holder
Description
Designed to hold generic screw/bolt extractors (stop them rattling around bottom of tool box!). You can use flat bottom or mount on the angled side with 4 mm screw hole. The holder is 56 mm long, 12 mm wide and 25 mm high. Square sizes 9 mm, 6.5 mm, 5.5 mm, 4.5 mm, 3.5 mm. These are scaled this way for a snug fit. Try this before scaling. Flip it on to its base for printing! Remember securing screw holes 4 mm! if you need bigger drill first!
Statistics
Likes
1
Downloads
0