Pour Spout Vases w/wall thickness
Description
These are NOT to be printed in Vase Mode! There are 2 vases in this set. Vase 1 (Short Spout Vase) is about 140 mm tall in its original form. It has 2.4 mm wall and a 2.4 mm base thickness. The Short Spouted Vase contains a bit of an oblong pouring spout in the design. Vase 2 (Medium Spouted Vase) is 180 mm tall at its original design height. This vase also has 2.4 mm walls and a 2.4 mm base thickness. The Medium Spouted Vase has a more drastic pour spout. The spout is longer with more of an angle. It also narrows at the tip of the spout. These Vases are not meant to be printed in Vase Mode as they are solid walled objects. You must have infill in order to connect the walls, just like in any normal object. The infill amount is up to you. If you decide to enlarge or shrink the vases in your slicer the walls will also increase and decrease in size in relation to your adjustments. I generally use a .6 mm nozzle for vases and pots, but you can print these with a .4 mm nozzle as well.
Statistics
Likes
8
Downloads
0