Nema23 Geared Stepper Motor Mount
Description
I made this motor mount for my Gearbox Nema 23 Geared Stepper Motor. I made the mount holes for mounting the mount to whatever you are going to attach it to slotted so you have the ability to slide the mount to tension your belt. It prints best for actual use in Dupont Zytel Nylon Filament. Because you will need supports do not use the Zytel to make them as it is extremely hard to remove them. What works best is Ionic Hi-Temp Hybrid Support Material. It is a little pricey, but you only use it for supports. Because the Zytel is fibrous, it is very strong, but you will have strings of it you will need to clean off of the final pring. I use a knife. You can get the Zytel and Ionic from Matterhackers: https://www.matterhackers.com/store/l/dupont-zytel-3d-filament-3d1000fk-nc010-175mm-1kg/sk/MR0A4G7R https://www.matterhackers.com/store/l/ionic-hi-temp-hybrid-support-material-175-075/sk/MA6Q2PM7 The stepper motor I got from Amazon: https://www.amazon.com/gp/product/B076Q7ZCH6/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Enjoy!
Statistics
Likes
1
Downloads
0