SMD Parts Reel - 9mm - Industry Standard Design 120mm
Description
If you like these designs (and have a spare minute from all that 3D printing!) check out my YouTube channel or website: https://www.youtube.com/channel/UCgItLzb2PnHYKeNAFSx0jpA/ https://pcburn.com 05/29/2020: Added a narrow version with 1.2mm wall thickness on the spools. While the thicker walls print better I found they didn't fit in the reel holders I'm using as well. Also, PLA seems like a better option to print these if you're having problems getting the PETG to release from the bed without cracking. I may modify them to have a second locating hole in the future if the thinner profile causes an issue with seating the face. I couldn't quite find what I liked for a SMD parts reel on Thingiverse so I've made my own. This one's got a simple notch for alignment of the two halves, a 3mm hole (which'll probably work with a 1/8 SAE wood or self tapping screw). It also has the center design of a normal industry reel which should be nice if I upgrade to a pick & place for my spools. This is a 120mm SMD Reel for spooling up your 9mm SMD parts tape on a plastic roll. Features include: Common 9mm width 3mm or 1/8 screw hole Positioning standoff (only requires one screw) Notch to assist in rolling your spool Standard three-prong interior that might even conform to Electronic Industries Association (EIA) Standard 481 I intend to add in other reel sizes as well.
Statistics
Likes
1
Downloads
0