Pinning tray for locksport / lockpicking (14 pin grooves, 42 disc detainer slots)
Description
Hi :) Here is a custom pinning tray I made at first for me, with me own requirements. As it might interest other fellow locksporters, here it is available for everyone ! FEATURES : - Dimension : 21 x 21.975 cm (8.27 x 8.65 inches), so it is large but printable on most level entry printers (ender 3, prusa, alfawise, ...). - Enough space to gut 2 moderate content locks or one heavy content lock. - 2 core slots (front part of the core can be placed on left or right side of the slot, but if place on the right side the core can lay with a key in it). - 2 key slots - 2 x 7 V shaped pin grooves. I like V shaped pin grooves as pins automatically lay vertically and well aligned when you put them in them. Also, V grooves are wide enough so you can put not only pins, but wafers, sliders, or disc detainers discs. - 2 x 21 disc detainer slots - 2 main storing areas. The storing areas have an opening in their wall, so you can neatly put down an item longer than these areas (like a screwdriver for example). Tiny grooves between areas ensure small parts will not roll from on area to elsewhere through the opening. - Lots of slots for keeping tiny parts tidy.
Statistics
Likes
8
Downloads
0