Open Z Drift V5. With Fusion Files.
Description
OpenZ Drift V5 is a Project, and a follow on from the two previous releases which were more Prototype, aiming to get some pre release intrest and help gather input. I had planed to try and keep it backward compatiable, But there are a few too many subtle changes, and this has been fully 'reengineered' Upgrades from the previous release include 'SLA' (Short Long Arm) suspension geometry, which helps to give extra camber to the inside wheel in a corner but minimal camber change from a bump. King Pin Camber angle has been increased to -8 deg, Not getting perfect scrub radius, but pretty good for this scale car. Some minor changes to the steering rack layout, and a comprehensive Fusion File with all the Planes , Sketches, and Axis, for Tweeking or awaiting some clever person to fully animate it? Included are Two basic set ups, One for Drift, with 0 Akermans, A fair bit of -ve Camber and transfer arms to double the steering travel. For Race, there are hubs with 7 deg Akermans and less or no -ve camber, more will be added. And a Standard Steering Rack, Toe In and Akermans are both fairly easy to change in the suplied files for the adventurous. There will be a range of lower arm length at some stage and other optional extras. I have included Two Chassis options for now, as well as a dedicated Chassis building file, so that others may use the sketches to build around my geometry and parts if they wish. There will be more parts added, But, there is a working setup uploaded and new parts will just be optionals. For those with a bit of Fusion Knowlege, I'm Self Taught! so be kind... For those wanting to learn, I'm Self Taught!, so I may not follow best practices, but, if you step back through the work flow it may inspire? I will have to add a BOM ect, The Ball Studs are 4.5mm (But, this can easily be changed), the suspension pivot pins are 14mm x 2mm (I use S/S pushbike spoke.), Most the holes are 1.8mm with a 2.2mm clearance hole. The Battery is 400mAh 2S (16mm x 20mm x 42mm).And the rear end at this point is shared with the OpenZ V27, Find us at https://www.facebook.com/groups/209094766350376/ And, Have fun!.
Statistics
Likes
140
Downloads
0