FireHD8 Tablet Holder for Ground Station
Description
This is a general purpose tripod mount tablet holder which I am using to support a Fire HD8 tablet for my ground station when flying my Mavic Mini Drone. The iPhone connects to the Fire HD tablet via Airplay. I mount the tablet on a tripod. You will need some threaded rod cut to length, 9 1/4-20 nuts as hardware to complete the build. You will need to print two knobs. The 1/4-20 nuts press fit into place. You may want to use a vise or vise grips to secure them. I included the Simplify3D factory file with my settings, but it is not critical as no supports or rafts are required. I printed at 15% fill but recommend a higher fill percentage. NOTE: I forgot to include the clamp. Print two of them. Also, you will need 9 nuts not 7. By the way, I use AirPlay on my iPhone to mirror the display on the FireHD tablet. You will need WiFi, so use the hotspot on your phone for that.
Statistics
Likes
0
Downloads
0