Hose Adapter For Waste Pipe On A Campervan
Description
My Carado camper van has an waste water outlet that is almost 48 mm wide. In some places there is no drain in the ground, so that you have to use a bucket or a hose. I measured the thread and drew this adapter to connect a hose. I use a small one (so that I don´t have to carry to much with me), 3/4 „ inner Diameter. You will have to wait till it´s empty, but it´s a lot better, than using a bucket. But I added STLs for 1" and 1 1/4" as well. If you just need it to empty your tank, you won´t need a seal; only a few drops will fall. But if you want to connect a hose permanently, on a camp yard for example, you better use the seal, printed from TPU. The thin cylinders on the inside are just for support. Break them off after finishing the print.
Statistics
Likes
35
Downloads
0