Ender 3 Damping Spring Feet for Printing at High Speeds & low noise
Description
Hi all, I have just modded my Ender 3 to direct driver Extruder and wanted to keep the high print speeds with same quality with low noise, so I have made those feet to use the stock Ender 3 bed leveling springs[most of us have upgraded those so they are unused]. The hole diameter fits perfeclly to the stock springs- just twist them CCW while pushing in and they will fit. After this mod you will see your printer starting to Dance because of all the forces generated by moving the bed/print head at high accelerations. Test this with high speed vs no feet and you will see the difference :-) You need to Print: SpringFeetFL is for the front left side[x1] SpringFeet is for the rest [X3] SpringFeetButtom[x4] *you can use double sided tape to secure them if you like. With those feet I can use Prusa MK3 profile with 2x the speed parameters like you see in the slicer image :-). Please share your make if you liked this :-)
Statistics
Likes
16
Downloads
0