Printable Robot Arm
Description
This Is My First Try To Build A Printable Robot Arm. I Was Inspired By The Demo Of Zortrax, But It'S My Own Design. It Is Not Tested Yet, I'M Still Printing. It Should Fit Together But. There Are 8 608Zz Ball Bearing Required To Mount The Arms. 2X M8X60Mm And 2X M8X65Mm Screws And 4 Nuts (Best Case Self Locking) The Main Motors Are Nema17, For The Forearm I Plan To Use A Nema11 With A Planetary Gear. The Screws To Mout The Parts Together Are M4 Remember This Is Untested! The Forearm And Gripper Are Also Not Finished Yet. First Test Of The Basis With The First Joint: Http://Youtu.Be/O5_Gnh2R2Gw 14.12.2014 I Updated Some Files... Most Should Fit Now, But Still A Work In Progress. 16.12.2014 All Parts Are Printed: Http://Youtu.Be/Xgjulacxrrq 19.12.2014 The Second Part: Http://Www.Thingiverse.Com/Thing:601036 I Started A Hackaday Project: Http://Hackaday.Io/Project/3800-3D-Printable-Robot-Arm You Can Find A Overview On My Blog: Http://Chaozlabs.Blogspot.De/2015/01/3D-Printable-Robot-Arm.Html
Statistics
Likes
1552
Downloads
0