90 deg barrell connector housing
Description
The barrell power connector on my MonoPrice Select Mini V2 broke and messed a couple of prints. Turn out the wire was not soldered properly inside the housing and it disconnected. I soldered it back and printed this housing. Turns out that just printing standard threads didn't work too well, So I made some custom ones (after a couple of failed attempts ! ) and now they seem to work just fine. If the nuts are too big for your liking you could just tape or super-glue the housing on your wire, it won't hurt my feelings, it's what I had to do before my threads were fixed ! I used PETG but PLA should be fine too. Enjoy !
Statistics
Likes
2
Downloads
0