Prusa MK3 Spool Holder with Bearings
Description
This is a spool holder designed for the Prusa MK3S or any Prusa i3 printers. The dimensions of the top of the main plate should be 6.25mm x 40mm. It uses some 608zz bearings to reduce the friction between the spool and the holder. It makes printing a very soft flexible filament easier. Besides the printed parts, you will need: * 2 x 608ZZ bearings * 4 x 5/16" nuts * 1 x 5/16" washer * 1 x 5/16" threaded rod, at least 4"1/4 long The bearings go inside the spool cylinder. 8mm hardware can also be used. Support is not needed. This object main web page is: http://www.ctheroux.com/prusa-mk3-spool-holder-with-bearings/. You can request the source files on the page listed above.
Statistics
Likes
3
Downloads
0