Tesla Wall Box Adapter G3/4
Description
The Tesla Wall Box is delivered with a large gaping hole where the cable is to be mounted. The tread in this hole is M32x1.5 and I did not have a cable gland for this large diameter. Luckily I had some G3/4 cable glands and a 3D printer… So I designed this adapter from M32x1.5 to G3/4. The gap should be sufficient to create a fine fit. Sealing kan be done with the original rubber gasket or an O-ring. Some teflon tape will also work fine.
Statistics
Likes
15
Downloads
0