Modular Smartwatch Stand
Description
# Description A modular smartwatch stand designed to support the charger for a Fossil Gen 5 or Apple Watch Series 5. Other series chargers may be compatible and potentially remixed for other brands. The stand can be oriented with the vertical stand on either side. There are cable runs that go out on either side of the base. Additionally, there is a bracket and angle part that allows the watch to sit at a 45-degree angle. The angle piece has a dovetail joint that will enable it to be flipped in either direction to fit your needs. On the base of the stand, there are two slots for magnets that allow you to place the stand on a metal surface securely. # Parts required for assembly - 2 - M3 x 8mm screws - 2 - M3 x 12mm screws - 2 - M3 x 12mm screws (if using the angle and bracket pieces) - 2 - 15mm x 6.5mm x 3mm magnets # Printing All pieces should be printed the way they are uploaded except the angle piece. I recommend rotating this so that the flat side opposite the wire slots and dovetail joints is facing down.
Statistics
Likes
18
Downloads
0