Cr10-Cr10s-Cr10Pro-CR-X - Foot Damper - V2
Description
Nb! This is version 2 witch is a much better solution for the heavier printers like Cr10-s pro - Cr-x - Ender 5 - Tevo Tornado Version 1 can be found here: https://www.thingiverse.com/thing:3678927, witch should only be used on the lighter printers like ender 3/ender 3 pro. I made this Squash Ball damper out of looking upon what was on Thingiverse ,every dampers i found ,were a bit too high for my taste "if it had to be mounted on the underside " ,so i decided to do my own version. If you found this design very helpful or otherwise wish to buy me a cup of coffee ( helps keeping the brain active so i can create new stuff ) ;-) ,then please consider using this link : <a href="https://www.buymeacoffee.com/Mb1vZjXUG" target="_blank"><img src="https://bmc-cdn.nyc3.digitaloceanspaces.com/BMC-button-images/custom_images/black_img.png" alt="Buy Me A Coffee" style="height: auto !important;width: auto !important;" ></a> This height is the absolutely lowest i can make this Squash Ball damper " if it has to be mounted on the underside " ,so the m4 bolt still have enough material to be tighten with onto the frame for the cr10 or the chassis of the cr-x / cr10pro . As you can see ,this can be mounted on Creality's Cr10 ,Cr10s series or the Cr-X and the Cr10Pro ,i think it also fits the Ender Series and the Tevo Tornado ,there exist clones of the Creality Cr10 that this should fit on also ,but i am not completely sure about this . Mounting the Squash Ball Foot . For the Cr10 or Cr10s you will have to replace the original m4 x 12mm button head with a m4 x 6mm button head and you need to use the one "small" washer from the original rubber foot for the new Squash Ball Foot . The above does not apply for the Cr-X and the Cr10-Pro ,for these you can simply reuse the m4 bolt and small washer ,because there is nothing in the chassis that can hinder the bolt from going to far in . From forums i have found that the best option is ,if you mount Squash Balls with the 2 Yellow dots ,and they seem to be the right choice ,they feel really good in terms of "spongyness" for this purpose ,not too much or too little .
Statistics
Likes
47
Downloads
0