Dwarf - Demons And Dice: Mini Builder
Description
This miniature have been designed with Demons And Dice: Mini Builder If you want to design your own miniatures, check our website: > http://demonsanddice.ddns.net/mini-builder/index.html And download the open beta version of the app. **Print Procedure** _Note: Due to the small parts that have this miniature, SLA printer is recommended._ In order to generate the supports for the miniature, I follow the next procedure: > Open Meshmixer: >> Import the *.obj file >> Go to Analysis >> Orientation >> Configure this tool with the next parameters: >>> Overhang Angle: 45 >>> Fit to Print Volume >>> Strength: 1 >>> Support Volume: 0 >>> Support Arena: 0 >> Choose the orientation that will generate the supports on the back of the miniature >> Accept the new orientation >> Export the miniature > Import the oriented miniature on your 3D printer program >> Add the supports >> Generate the file for your printer _Note: I prefer to not generate the supports with Meshmixer because I have detected problems with supports too close to the miniature (they join with miniature parts and make harder the task of removing them once the miniature is printed)_ _Note: To generate the supports (with CHITUBOX 64, and for my Sparkmaker FHD printer), I use the next configuration:_ > Z Lift Height: 4.00 mm > Contact Shape: None > Contact diameter: 0.30 mm > Contact Depth: 0.20 mm > Connection Shape: Cone > Upper Diameter: 0.20 mm > Lower Diameter: 0.70 mm > Connection Length: 2.00 mm > Auto Support: >> Minimum Length: 5.00 mm >> Cross Start Height: 3.00 mm >> Density: 50% >> Angle: 45
Statistics
Likes
5
Downloads
0