X-Axis Endstop Bracket
Description
This Bracket Was Made To Fit The Mendelmax 1.5 X-Axis Using The Pillow Blocks From Lulzbot (Https://Www.Lulzbot.Com/Acme-Pillow-Block-X-End-Set-2.0). The Clamps Fit Tight On To The 8Mm X-Axis Rods To Eliminate Possible Movement Of The Endstop. The Endstop Mount Is Derived From The X-Axis Mount From Here Http://Www.Thingiverse.Com/Thing:181468. I Modified The Height To Lower The Endstop To Be Closer To The Rods And Moved The Clamps To Fit The Spacing Requirement.
Statistics
Likes
12
Downloads
0