Buffalo Extruder With Optical Endstop Tweaked.
Description
I really liked the original design, but the optical endstops I bought didn't quite trigger with the screw placement; it needed to be .5-1mm further back. I also broke the mount on the first one I bought, so I also slightly beefed up the optical endstop mount. I also made the endstop mount slightly taller for more room for the spring. There are two versions, one with the same size of nut slot, and one with an extra .15mm for the nuts as I cracked a print trying to force a nut in.
Statistics
Likes
0
Downloads
0