Final Fantasy 7 Aeris Guard Stick
Description
Available with 2 Center Cap options: - 30mm all the way through with Printed Materia - 30mm entry and 24mm exit with Holes for Materia -- This option allows for a smaller pipe on exit from the pipe so that the Materia Holes can be filled with 16mm Marbles Each part needs to be printed twice and will require either: - 30mm CenterCap option -- 2 x 40mm pvc pipes for the End and Middle Caps to be placed in -- 1 x 28mm-30mm pvc pipe (Recommend 28mm with layers added from painting!!) --- This will be the length of the Staff and will also fit inside the hole in the middle of the End Cap (if you want to assemble that way) - 30mm / 24mm CenterCap option -- 2 x 40mm pvc pipes for the End and Middle Caps to be placed in -- 2 x 28mm-30mm pipe (Recommend 28mm with layers added from painting!!) -- 1x 24mm pvc pipe to go inside the 28mm-30mm pipe and --- The 24mm pipe will be the length of the Staff and will also fit inside the hole in the middle of the End Cap (if you want to assemble that way) I will also add a Make to this showing the process of how I made / assembled mine
Statistics
Likes
38
Downloads
0