BLTouch with 25mm to 40mm Fan Adapter for Mosquito Magnum Hotend and Cutout for Bondtech
Description
#### Designed to fit most mosquito hotend applications I designed this adapter because although there are many all-in-one hotend/extruder assemblies designed for mosquitoes for Prusa MK2/3 and or other hyper-specific printer models. There are also nearly none that attach solely to the hotend heatsink without taking up a large amount of space around the hotend. This adapter should work for nearly **anyone** using a Mosquito Regular/Magnum Hotend who wants to use a quieter **40mm fan** and a **BLTouch Probe**. This is possible because the top surface of the hotend is **not obstructed** in any way, allowing the use any of the printed or machined Slice Engineering adapters for many direct drive or bowden setups. *A future version may include a couple holes on the front side to allow mounting of an existing blower type part cooler. Feel free to modify and add your own.* #### Suggested Assembly Instructions: 1. Install Adapter on an umounted Mosquito heatsink. 2. Install and adjust BLTouch probe height according to your manual (differs between v1-v2, smart, generic, etc) 3. Mount Mosquito hotend to the Adapter-heatsink assembly 4. Mount to BondTech extruder or any of the slice engineering adapters. 5. Install hotend/adapter/extruder combo to gantry or effector
Statistics
Likes
0
Downloads
0