Spool Drawers
Description
Another spool drawer. This is plain jane for a Coex 10lb spool. There are 3 full height drawers and 3 half heights included. 4 drawers around the spool. You can choose just one big drawer, with 3 sections, or with 6 sections. Drawers require a minimum bed size of 150X160mm and 90mm for full height. It's designed to have the drawers attached with a 1/4" rod at the front left corner this will make the spools stackable. The rod can be purchased at Home Depot and other hardware stores. 2 templates are included to accurately mark the holes in the spool on both sides so it's straight and square. The quarter template requires a bed of 230X230 minimum. The full template needs a bed size of 300X300. If you have a smaller bed then it's up to you to measure it all out and square it up. Drawer dimensions are: 130mm ID (outer spool hub) 300mm OD (total spool diameter) 90mm drawer height (spool width)
Statistics
Likes
60
Downloads
0