Bowel cleaner (shower butt plug)
Description
Some devices to handle constipation. All can be attached to standard 1/2" shower hoses. Print in food safe PETG, a liquid rubber coat may be a good idea. Remove all sharp edges and flaws. Handle responsibly and AT YOU VERY OWN RISK. ArsoKleen is a travel gadged designed for my wife who suffers from constipation when away from home. Helps to unblock her bowels. May be printed in one or two parts. If printed in two parts, just place the cross-section of the ball flat to the print bed. Glue together with cyanacrylate. DeepClean is intended for the even worse situations. It intrudes further and helps to bring the water deeper inside. Print standing on the bottom, print one of the SuperCleaner threads and glue it into place with cyanacrylate. You might additionally print out the DeepClean_cap, which can be used instead of connecting to a shower hose, just to close the water connection. Finally there's the SuperCleaner. For a full treatment. Glue in the inlet thread to the smaller opening, optionally also the outlet thread to the wider opening. Also intended to be printed standing upright. All parts do not need support structures when printed as explained. Use high resolution or dynamic layer heights to get best results possible without the need for manual finishing. Again, use responsibly and at your own risk.
Statistics
Likes
38
Downloads
0