Tripod Folding MagicMount
Description
<p>My MagicMount(tm) base lost adhesion, so I decided to make one. This is my first project with Fusion 360, and I decided that the ball adapter part seemed too hard for a starter project. Instead I modeled the housing for the magnets, and mixed it with a modified phone arm from the Tripod Folding thing.</p> <p>There are some things that are not perfect. I deemed it good enough, but be gently warned, the MagicMount cover is very tight, and the tabs that hold it on, don't all line up properly. It seems very stable though.</p> <p>Use the four screws that come out of the MagicMount assembly when you are liberating the magnets in their flex housing to affix the magnet assembly to the case.</p>
Statistics
Likes
11
Downloads
0