Core A8 slim 20mm compact
Description
This is a work in progress, DON'T PRINT IT! I'll test it as soon as I receive the new board. I don't plan to use a 310x310mm bed in the future so I created this mod to make the printer smaller without losing print area. This mod works with Core A8 slim 20mm (https://www.thingiverse.com/thing:3588785) and Core A8 E3D-V6 carriage (https://www.thingiverse.com/thing:3653778). You need to cut the frame pieces to these sizes: Vertical Z Tube 400mm x 4 Horizontal Y Tube 306mm x 2 Horizontal X Tube Top 251mm x 2 Horizontal X Tube Bottom 346mm x 2 Z rod 400mm x 2 X rod 286mm x 2 Y rod 286mm x 2 Overall size when built is about 42 x 40 x 48 cm (reduced about 10 cm on x and y axis and 2 cm on z axis). Printed parts you need: Top rod mount support x 2 Top rod mount x 2 Bed support x 2 Clamp compact x 2 z support x 2 z support lock x 4 I also replaced original steel rods with aluminium ones to reduce drag, this is optional! Additional parts you need: LM8UU x2 (to replace LM8LUU on z axis) Some M3 screws and bolts
Statistics
Likes
1
Downloads
0