Traxxas TRX-3 / TCP Front Bulkhead
Description
Front bulkhead for the Traxxas TRX-3 / TCP series vehicles. Ream the front pivot with the appropriate drill size (start with a 3 mm bit and then use a 1/8") - I would start with a 3 mm drill bit and work your way up. Tap the mounting holes with a M4 tap. UPDATE 07/29/20: Minor tweaks made to the front bulkhead to improve fitup (0.25 mm change) - I doubt this would effect much. I have left the old version in the file for now. I have added a 25 degree version, which should bolt up and keeps everything the same - it would slightly extend the wheelbase as it is leaned forward slightly but the rear portion of the arm has been kept the same. This would allow you to use the optional 25 degree blocks to achieve 20 degrees of caster, and the "standard" 30 degree blocks would give you a 25 degree kickup. I may play around with a 27.5 degree version (which would give some interesting positions, but may just play around with different caster blocks instead).
Statistics
Likes
2
Downloads
0