Anet A8 Spindle mount (52mm)
Description
This is a spindle mount for the common 52mm diameter CNC spindles and mounts directly to the ANET A8 X-carriage. To mount the spindle there are 4x M6x60 screws and 4x M6 nuts needed. Insert these from the side into the main part (Maybe heat the nuts to insert them and centre them inline with the holes). The other parts can be salvaged from the original carriage. Print with supports since the nut holes on the sides are a tight fit. Be careful while clamping it down! Maybe consider heat resistant filament (Depends on how hot your spindle runs, I used PLA for all)
Statistics
Likes
2
Downloads
0