Airsoft GHK AK variable-FPS nozzle mod
Description
SEE INSTRUCTIONS BELOW! NOTE! I AM NOT RESPONSIBLE IF YOU DECIDE TO MODIFY YOUR EQUIPMENT. YOU MAY VOID ANY WARRANTY BY FOLLOWING THIS TUTORIAL!!! Overview: Modify a stock GHK AK nozzle to allow for on-the-fly FPS adjustment. No tap set required! Why: You own a GHK AK, which shoots too hot for your field and you need to lower the FPS. At the same time you don’t want to permanently be stuck with a single FPS choice, and need to be able to dial in the FPS depending on the field you play at. What does it do, and how: Screwing a small set-screw further into the stock nozzle constricts the airflow to the barrel, thus reducing FPS. Screwing the set-screw in & out will allow you to tailor your FPS for your specific field. You will not be able to increase FPS more than what ever the stock nozzle could achieve. Parts list: X1 M4 - 0.7 x 6mm 3.5mm drill bit Super glue/ epoxy 3d printed “Set_Screw_Washer_V2” 3D printed “Drill_Bit_Helper_V2”
Statistics
Likes
17
Downloads
0