ZX-Uno case, a Sinclair ZX Spectrum clone
Description
Zx-Uno (Version 2) Case, A Sinclair Zx Spectrum Computer Clone. Basically It'S A Fpga Based Board Focused In The Synthesis Of Zx Spectrum Models. It Has The Same Size Of A Raspberry Pi (85.60X56Mm) So It Would Fit Into A Raspi Case. You Can Find More Information About This Project Here Http://Zxuno.Speccy.Org/Index_E.Shtml ## The Case: Updated 05/16/2015 (Last Update) There Are Three Versions Of This Thing: The Version "Case_For_Logo_Parts" + "White_Logo_Only" + "Logo_Pin" (4X) To Get A Case With Color Logo. The Versión "Case_Logo_Black" Or "Case_Logo_Trimmed" Don'T Need Any Extra Parts, Because The Logo Is Included Into The Model. Also You Can Use Only "Case_For_Logo_Parts", If You Decide To Use A Sticker For The Logo, As Show In A Picture. In This Last Update, You Can Find A Blind Hole For The Expasion Connector Of Zx-Uno Pcb. You Can Break And Remove Easily This Cover With A Screw Driver (View The Picture) **Remember:** All Versions Can Be Printed **Without** Material Support. Please Note That You Will Need To Use "M3" Flat Head Screws (Long 7 Mm) For Mount The Case And You Must Use Optical Fiber Cable Too If You Want See The Pcb'S Leds Bright From Outside. There Is A Hole "8" Shaped At The Right Corner For Put This Cable (Use Optical Fiber Of 3 Mm Diameter). There Is Some More Information Extra Here (In Spanish) Http://Www.Zonadepruebas.Com//Viewtopic.Php?F=26&T=5812&Start=440#P52285 Here... Http://Www.Zonadepruebas.Com/Viewtopic.Php?F=26&T=5933&P=53506#P53506 And Here... Http://Zonadepruebas.Com/Viewtopic.Php?F=26&T=6158&P=57077#P57077 Credits: This Is A Derivative Work, Based In The Original Design Of Jepalza (Spain). Thank You! Enjoy!
Statistics
Likes
46
Downloads
0