Hanging lattice strip shelf
Description
A shelf to hang under another shelf, using wood "lattice strips" from the hardware store. These are "1½ inch Lattice" at my local hardware store. Most of the pieces I get are <1.5 inch x <.250 inch thick. Some pieces are too big. The holes for the wood strips are 40mm x 6.1mm (1.575 inch x .240 inch). I included a .stl of the holes to test fit yours. Make it as short or as long as you want. Longer shelves may need a bracket in the center to prevent drooping. Mount the shelves using the screwholes & then slide in the wood strips. If you put it in a cramped area, you may need to put a hole or a slot in the ends of some wood strips to allow screwdriver access. 9 different shelf pieces. Curves or Hex pattern short or tall (about 2.5 & 3.5 inch) single or Double shelf 1, 3, or 4 wood strips .3mm layers 20% infill support in screw holes Brim maybe made with Tinkercad
Statistics
Likes
15
Downloads
0