Strainer for 32oz Ziploc Container For Cleaning SLA Prints
Description
This is a strainer for use with 32oz Ziploc storage containers but may work with others. I have been unable to find the pickle containers others are using for cleanup with their resin printers so I decided to buy a suitable size Ziploc container and design my own strainer for it. This is designed to be stored inside of the container with the lid closed. There are 10mm standoffs on the bottom of the strainer to minimize sediment sticking to the print to be cleaned however if they are not desired they can be snapped off. This might be able to be printed on an SLA printer but the tolerances are designed for FDM. Printed great in PETG but any material should be fine as long as it can withstand whatever chemical is stored in the container. Print the strainer and 2 handles. Handles need to be snapped into the two off sized slots on the side and are designed to be a tight fit.
Statistics
Likes
8
Downloads
0