Colonel Wasp Firefly Shotgun Improved Mag Follower
Description
A single piece improved version of the mag follower for Colonel Wasp's Firefly shotgun. Comes in long skirt (recommended) or short skirt versions. * Has a better looking non-stepped design and a slight taper to the base to help it move. * Long skirt version to help movement (does not affect capacity). * Mag spring further recessed into body to slighty increase mag/shell capacity. Overview video: https://youtu.be/SHZGhNnebOM I've included the OpenSCAD file you so you easily edit it too. 80 Degree supports as the inside has a flat interior roof. //---------------------------- // 24/May/2020 // Initial version //---------------------------- // 12/June/2020 // Changed the inner depth to 24.5mm to hold more of the mag spring (The follower is effectively moved further back) to increase mag capacity by 1 (it's about 29mm at full compression) //---------------------------- // 12/June/2020 // Change to use modules // Lengthed the skirt to fully cover the mag spring at full compression // This won't affect the postion of the follower (the increase in mag length from the previous change remains), the end of the follower remains in the mag tube when empty this should help prevent the follower getting stuck loading the first shell // Addition of statement to allow the selection of normal or long skirt versions //----------------------------
Statistics
Likes
9
Downloads
0