Colonel Wasp Firefly Shotgun Central Holder Piece
Description
This is a copy of the central holder section of Colonal Wasp's Firefly shotgun, as mine snapped. Comes in short (stock) and long (recommended for extra support) versions. Should be compatible with the stock mag follower but I recommend my improved mag follower. https://www.thingiverse.com/thing:4392093 Which when used with my muzzle piece brings shell capacity upto a total of 7. There are some changes, the unneeded cut outs at the top-centre and top-right (development leftovers?) have been removed. The cutout for the swinging gate arm has been reduced in size to just what is needed. The back face is a lots less busy now. The cutouts in the shell feeding ramp are gone (not needed and I'm not modeling all of them!) The oval shape extends the full length, why make it weaker by removing the bits between the barrel. Overview video: https://youtu.be/SHZGhNnebOM I've included the OpenSCAD file you so you easily edit it too. //---------------------------- // 24/May/2020 // Initial version //---------------------------- // 05/June/2020 // Tightened up the Mag tube holder // Tightened the bit after the mag tube to help mag follower movement // Added a feeding ramp into the barrel shell entry // Reduced the size of the extractor finger cutout to match the shell better // Slightly deepened the swinging shell gate cutout (to improve clearance of the swinging shell gate I designed) // Added a feeding ramp into the mag tube entry //---------------------------- // 26/June/2021 // Added a longer version that fits inside the pumpgrip to increase barrel and mag tube support // Added decrptive triangles to front face and my logo to sides //----------------------------
Statistics
Likes
11
Downloads
0