Wargame: Barn with moveable doors
Description
I reworked [this barn](https://www.thingiverse.com/thing:437681) so that the front and back doors can be opened. The roof was also reworked a bit, gaps where removed and splitted into several parts. Scaled down to 80%. On a 1:100 scale the front doors are now approx. 4m wide. For this scaling, you need a 89mm long rod or wire, that is 0.8mm thick, where the doors hang on. I also made the frame smaller. It should be placed above the doors, so it does not block the entrance.
Statistics
Likes
22
Downloads
0