1/2in (21.3mm) PVC pipe camera stick & mount
Description
This thing is in two pieces - one is a connector for (quite firmly) connecting two 1/2in PVC pipes together, and the other is an end-cap which you can put a 1/4in tripod screw (like any of [these](https://www.amazon.com/s?k=1%2F4+in+camera+screw&i=electronics&ref=nb_sb_noss_2)) to attach a camera. This is great for getting 360 cameras up very high for fake 'drone' shots; the neat thing is that a 1/2in pipe will reside almost completely in the stitch line of most small 360 cameras and will appear to be invisible in the shots. Carefully test how many PVC pieces you can stick together - it will wobble quite a lot when it gets long. Rotational forces at the connectors can be quite high with even a minor bit of wobble, and if it gets too high the PVC pipes will pop right out of the connectors. Test thoroughly somewhere without the camera and with soft ground/carpet before you shoot for real.
Statistics
Likes
4
Downloads
0