IN-12 Nixie Clock
Description
This is a case I designed for a nixie clock kit which I purchased on Ebay. There are a couple of modifications to the kit required. First, the display must be connected to the main pcb with wires instead of headers. Second, the real time clock module should be soldered to the bottom of the board. To install the PCB and the backplate, you'll need 4 M2X8ish screws. They are the standard "cheap chinese crap" screws that you can get out of other broken electronics from the dollar store or whatever. They can also be purchased on aliexpress. Parts: Screws - https://www.aliexpress.com/item/32367637858.html Kit - https://www.ebay.com/itm/Nixie-Clock-Kit-IN-12-With-tubes-with-Arduino/373028484856 The kit was purchased from the ebay user poltava_workshop. It is however open source, though the instructions are in russian https://alexgyver.ru/nixieclock_v2/
Statistics
Likes
4
Downloads
0