Deep 13/16 inch Spark Plug Wrench with 1/2 inch Driver for Honda Engine Mowers
Description
Functionally viable alternative to spark plug wrench. If using an FDM printer, recommended material is PLA due to its rigidity. Fits Honda engine GCV160 and others. Measurements are 13/16 inch on the socket side, 1/2 inch on the driver side. Print either solid, or greater than 5-6 walls. Print upright. Make sure slicer renders socket section solid. Print hotter (>215°C for PLA) and/or slower than usual, 0.12mm or 0.16mm layer height, and wider line width. Use 0.5mm for 0.4mm nozzles. Make sure Adaptive Layer Height is off.
Statistics
Likes
1
Downloads
0