Electric_toothbrush_base_multi
Description
My brother has 4 electric toothbrushes and wanted something to help hold the bases neatly when he charged all of them. I designed this peice with flat edges and locating holes so the can be glued together. I used a wooden skewer of diameter 3mm and super glue. To flatten the edges a little more I got a sanding stone and sliding the flat edge back and forth on a flat surface with the sanding stone as the 'wall' (perpendicular to the surface) helped a bit. The holes may need to be redrilled with a 3mm drill. I cut the small inserts to the right length before inserting and gluing. The print is a tight fit for the base and some force may be required to push it in. After that it should keep gripped quite nicely. There is a keyhole shape for sliping onto a screw, sticking partly out of the wall. if using multiple, the hole centers should be 50mm apart.
Statistics
Likes
2
Downloads
0