Rhino Rack roof mount for Mercedes Vito / Viano W639
Description
## Rhino Rack roof mount for Mercedes Vito / Viano W639 There are six different mounts because the roof is curved. These mounts are designed so that the load bars are level and perpendicular to the vehicle. They are low profile, so there is approx. ~45mm clearance from the underside of the middle bar. The frontmost mount point over the cab is not used as this is not suitable for bearing load according to Mercedes. Bar bolt is m10 25mm Roof bolts are m6 25mm hex cap Print using a technical / mechanical filament at high infill (eg PA-CF / PA-GF). Do not use PLA.
Statistics
Likes
5
Downloads
0