Scaramanga Knife
Description
– only one thing to print – no support required – no screws required – for 60x19mm trapezoidal blades – can be used as key chain <b>How to release the blade...</b> Due to the 0.6mm gap, you can easily spread the case with your thumb and pull/release the blade. <b>Important...</b> Due to the inner life, the case is to be printed in standing position. Depending on your printer quality, you might have to gently crack/cut the gap apart. <b>Positions...</b> 0 = locked (stowed) 1 = small blade 2 = bigger blade 3 = replacement
Statistics
Likes
11
Downloads
0