Ender3, CR-10/20 (with Prusa extruder)
Description
<iframe width="560" height="315" src="https://www.youtube.com/embed/-147EPjhva0" frameborder="0" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe> Features 1. Direct extruder with dual gear allows you to flexible filament 2. No additional parts or wires are required. This kit uses all ender3 printer parts and you will not need to replace any part or cut any wire. 3. Automatical Bed leveling 4. Automatical load/unload filament List of components 1) Cable fixture 1 M3x20mm screw with a few zip ties, 2) Nozzle Fan holder2 M3x10mm with 2 M2 x 10 mm screw, 3) Gear idlerDual gear with 2 M3x25mm screws, 4) Direct extruder cover with 2 M3x20mm screws, 5) Direct extruder body with 4 M3x25mm screws. (parts is labeled from left to right ) The detail assembly instruction is listed on our website https://precision-3dprinting.com/ender3-direct-extruder-upgradekit/ You can also purchase this kit from our online shop. https://precision-3dprinting.myshopify.com/collections/3d-printer-accessary/products/ender3-direct-extruder-kit This kit does need to update to Marlin2.0 firmware. Here is our Github project. https://github.com/p3dp/marlin-bugfix-2.0-ender3.git You need to calibrate the extruder, the E step/mm is 145.
Statistics
Likes
8
Downloads
0