Raspberry Pi Camera Case & Mount for Octoprint
Description
I was looking for a customize-able camera mounting system for my different pi cameras, since I couldn't find what I was looking for i got to work. Leveraging the connectors from Tinkercad I created the arm system. You will need at least one of arm A for the ball joint system. I designed the case from scratch around the pi cam v2 (Back options can be added on or printed as one piece. Also included a rail clip for mounting a go pro to any 40mm extrusion railing, a 360 go pro mount (concept only), and a back panel with a go pro style mount. (all works in progress) Rail Mounts will clip on to any 40mm dual extrusion aluminum railing and provides multiple mounting options based on the length/location of your pi. Case is held together with 2mm screws. For a cleaner look use a rear case with a built in mount and 2mmx8mm or 2mmx10mm screws. (do not over tighten) For a more secured option i'd recommend longer screws and nuts 2mmx12mm w/ nuts for standard or backs with built in connectors 2mmx16mm for add on connectors This is a work in progress. 2mm screw kit - https://www.amazon.com/gp/product/B07W6GMK58/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B07W6GMK58&linkCode=as2&tag=oglesbyholdin-20&linkId=ccab81097bcc3159b9fad88fff83ae14 Added 20mm snap on rails and an A frame for mounting on the front of a CR10s5 ot mount on any 20mm extrusion.
Statistics
Likes
119
Downloads
0