Prusa MK3 Copperhead Groovemount Adapter
Description
June 1, 2020 - This is a first pass at my Slice Engineering's Copperhead groove mount hot end adapter. There may/will be some changes as I test it out but I just wanted to get it out there for other early adopters. Notes an installing: - Assemble the Copperhead as shown in the photograph and diagram - Insert a PTFE tube all the way into the Copperhead - Snap the Copperhead into the Extruder Body to mark PTFE cut point - Remove PTFE to get straight cut and bevel inside of PTFE top - Use Prusa stock parts for fan mount, nozzle shroud and sensor assembly Notes on printing: - Sorry for orientation. Will fix. Print Motor Mount and cover 180 rotated - Extruder Cover has an indent with Copperhead logo - Also provided is the logo if you have MMU capabilities - Standard print specs - PETG - 15% fill - .20mm Quality Note on maintenance: There is a small hole inside the baffle which gives you access to the heat break tension screw. This will allow you to remove (drop down) the heat break/heat block assembly without taking the extruder apart. Just remove the cooling fan to access it. More to come....
Statistics
Likes
12
Downloads
0