Keyforge Box (6 Decks + Tokens)
Description
This box is designed to hold 6 Keyforge decks along with all the tokens you need for two players. The lid features all current faction logos. The box has space for 3 inset trays, you can use any combination of the two trays supplied (I used 2 with internal dividers and one open tray). It's a little hard to get the open tray out if it's on the bottom of the stack so I tend to leave that one on top. The base and lid have holes in them for 3mm x 8mm magnets (with a small tolerance) to secure the lid. I printed this in PLA with no supports (the lid should be printed upside down and the logos should bridge fine on most printers). You might want a brim if your having some warping issues, hopefully the rounded corners will help. This model is optimised for 0.4mm nozzles, If you use anything bigger the walls might not come out great. _**Warning:** Keyforge decks are (roughly) 40 cards. The box has space for a Keyforge deck in standard card protectors with plenty of space, but it won't fit a 60 card deck._
Statistics
Likes
11
Downloads
0