Mini Pillar Drill (Mini Drill Press)
Description
Mini overkill pillar drill Fusion360 files included to modify as you please :) No need for supports 20-50% infill 0.2mm layer heights 0.4mm nozzle 3 parameters NEEDED ITEMS: MAIN STRUCTURE 6 x 19cm rod 2 x 21-22cm 8mm threaded rod HANDLE 1 x 13-14cm 8mm threaded rod (for COG & SPINE cross piece) 1 x 9cm 8mm threaded rod (for arm) SPRING 1 x 2.1cm x 14cm spring MOTOR 27.8mm around motor from a cheap Dremel I also used STUD-LOCK on the nuts for the arm to stop it from moving, superglue would do it just as well. And superglue the nuts at the bottom in. ( I may alter the design so save doing this! )
Statistics
Likes
6
Downloads
0