TronXY Bed Center Leveling Point
Description
For this build you will need: 1 - Aluminum U-Channel 12.70mm x 10mm x 560mm ( I bought mine at Lowe's) 1 - M4-.7- x 40mm Hex Bolt ( If you need more rise you could use a 50mm bolt) 2 - M4-.7- x 30mm Hex Bolts You will also need a drill and a bit large enough to drill a hole allow the 40mm bolt to screw through the U-Channel. I build mine out of PETG, but PLA should work too.
Statistics
Likes
3
Downloads
0