FLSUN QQ-S Fly Bowden "0" weight
Description
Hey. Some time ago, I decided to rearrange the extruder closer to the hot end. There is a good development for my printer: https://www.thingiverse.com/thing:4355343 But this design has a big drawback: the extra weight creates a load on the belts and increases the energy of the structure. Then I thought: what if we do the way an ordinary elevator works. I removed the cable from the center of the roof and put my structure there. Using two rollers with bearings, I pulled out a cord and hung a load of about 0.5 kilograms on it. This greatly relieved the head and improved its performance: https://youtu.be/pDTKlmtPjVk The printer works much quieter, you can print faster and use soft filaments.
Statistics
Likes
26
Downloads
0