Floating Plant Pot
Description
Hey guys I hope you like this design for a floating plant pot. Key points: ======== > The space between the center parts should be 20mm. > The max weight is 345g. > The hole size is 1.4mm but when printed is goes down to 0.75 so use a string of 0.5 to 0.6mm in diameter, if you can get a multithread cord works best. > Only use supports for the middle bits that hang the rest of the part and the channel at the bottom of the foot doesn't require support at all. > Box needs to be printed upside down so that you don't have to do any cleaning to ensure the box and the foot fit properly. IMPORTANT ========== When feeding through the thread for the 8 holes on the bends of the square the whole thread needs to be in a continuous pattern, what I mean by this is that you DON'T use 4 small threads to hold the system together. if you do that you will find it really hard for obtaining the right balance when the plant is on it. >> please see images I have included the f3d files too. > I will also make new pots soon > if you have any suggestions feel free to comment below. If you want to invite me for a cup of coffee: yoyo12345@live.co.uk - Paypal Other than that enjoy and I hope you find it intriguing and useful. MrJefferson105 - Youtube
Statistics
Likes
72
Downloads
0