Nextion enhanced 3.2 in touch mount for 3/4 in panel
Description
If you made a MAME panel and need a flush mount option for your 3.2 Nextion display this is for you. Lip covers imperfections of cutout so it does not need to be that clean. qty 4 = number 4 screws 5/8 in from local hardware store secures the cover and board to the bottom. Mounts from underneath wires terminate out the back/bottom. There is no cut out for the expansion on the right side but a cutout for the main connector 5v, gnd, tx and RX I am no longer working due to all that has happened and tips not mandatory but appreciated Personal use only please Print times on Ender 3 Pro CoverW Lip.stl is the top part at .12 APX 3 Hours 45 min at .20 APX 2 Hours 10 min Bezzel flush mount at .20 APX 6 Hours holes in bottom piece oval to allow slight adjustment if needed.
Statistics
Likes
2
Downloads
0