Simple .44 six round holder and speedloader
Description
Simple speedloader for Smith & Wesson 629 6,5" cal. 44 Magnum. Two parts with hole inside for two 8x4 round magnets. In height 17.10 and 21.30 pause printing (you can use G-code command M600) and insert magnets. The hole is tight to avoid sticking magnet to extruder. My red PETG is more difficult to insert magnet, try enlarge the hole with a knife. Print two parts with different color to indicate wich one is top. Keep magnet orientation for both color (for replacing). Between parts there is 1mm gap to indicate the speedloader is full, but maybe it's too small. Bigger gap causes instability. Let me know if it is useful.
Statistics
Likes
2
Downloads
0